New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: AcePeter on April 13, 2020, 02:04:37 PM

Title: Cutting rails out of IGT S+
Post by: AcePeter on April 13, 2020, 02:04:37 PM

What's  the best tool to cut the rails out? I have some WBA chassis I want to put in a few IGT S + that have old DBV 200s in them. I have everything I need to do this but those rails get in the way of the WBA cash can. Wish I could bypass the can.

Title: Re: Cutting rails out of IGT S+
Post by: slots4home on April 13, 2020, 02:17:34 PM

I have used a sawsall with a small blade
That works best for me

Title: Re: Cutting rails out of IGT S+
Post by: AcePeter on April 13, 2020, 02:25:09 PM

Thanks slots4home. :thank_you:

Title: Re: Cutting rails out of IGT S+
Post by: Stayouttadabunker on April 13, 2020, 04:40:20 PM

ACE,
Can you post before and after pics?
I've never taken out any "rails"

Title: Re: Cutting rails out of IGT S+
Post by: sixcardmark on April 13, 2020, 04:48:23 PM

Here's an "after" if you drill out the welds instead of cutting off the rails.

Title: Re: Cutting rails out of IGT S+
Post by: AcePeter on April 14, 2020, 05:21:27 AM

Thanks for the replies. I'm gonna tackle this soon. :thank_you:

Title: Re: Cutting rails out of IGT S+
Post by: AcePeter on April 14, 2020, 08:02:54 AM

I didn't cut the rails out I drilled them out. All works fine. The only thing I had to do was rig the light bezel wire to get the light to come on,  but had no problem. Easy as pie once you get the rails out.