New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: BIGALD on January 01, 2023, 09:35:07 AM
-
Hello I am new to this I have an 2003 IGT S2000 double diamond haywire, The problem is it goes through its start up and the wheels turn for a split second and goes through the cycle again and info would be appreciated thank you.
-
Turn the power off, remove the MPU and show us some close up pictures of the circuit board, especially of the area near the big green Varta battery.
Also, what messages are you seeing on the blue reel glass VFD display?
BTW....VFD means "Vacuum Fluorescent Display"
-
Sounds like a bad power supply to me.
-
What Tilt said. I'd start with the power supply. If that doesn't work, the MPU board will have to get checked out.
-
Hello I again have a different problem now the machine is on but 5 of the 6 lights are on at the compter and no displays any suggestions thank you.
-
What color lights are on?
Did you ty a new power supply as the guys suggested?
-
Hello they are all yellow
-
Try re-seating the power supply behind the reels.
It might be loose from the main connector located on the right-hand side of it.
-
Hello tried that but the same, ya know we did have some thunder storms I wonder can it take out part of the power supply
-
oh...at least the red LED isn't lit up....Four amber + one green LED...that's good.
You DO have a camera.
Take a high resolution picture of the MPU circuit board...reduce it to 1000MB to fit in an "Attachment".
One way to do it is to email it to yourself, you will be given an option to resize it.
Try to resize it 1000kB if possible.
Your photo above is sized at 830x840...you're allowed up to 1000pixels either horizontally or vertically.
Take the photo near that big green Varta battery....put it in "Attachments and other options" in your next Reply.
Circuit board repair experts will be able to tell you if your board needs to be sent in for repairs or not.
Make sure the power to the machine is [OFF], before sliding that MPU out.
-
OK I will do that next thank you for all the help.
-
Hello is this what your looking for
-
I see damage from battery electrolyte on this board. You need to test it in another cabinet, or send it out for testing and repair. Does the red LED flash every few seconds? If it does flash, it's probably a problem with the MPU. I can't tell for sure from the picture, but it looks like someone tried to clean it with vinegar or something equally as useless. The 'double stack' IC U52's label is curled and coming off from a lot of exposure to moisture.
I can test boards and tell you if they are good, or what the chances are of repair for the cost of shipping two ways. Then you will know if it's the MPU, or not. If it can be repaired, the cost is still far less than what they are getting for these boards now. Yours is a 504B and getting harder to find. Worth looking at.
-
Hello I did not see the red blink at all, I did not try to clean it this is how I bought the machine I have owned this machine for over a year who can I send it to to get it checked out and repaired I use it all the time.Not sure if I said there is no displays either the reels don't spin and the bill validator does nothing it just goes on and nothing with these lights thank you.