New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: danatlvc on February 10, 2023, 07:46:14 PM

Title: IGT PE+ 1070C Blows flouresent tubes & starters top & bottom?
Post by: danatlvc on February 10, 2023, 07:46:14 PM

Hello All
I have an IGT PE+ 17" upright model 1070C I picked up to restore
I have it working perfectly EXCEPT I cannot get the top & bottom glass lights to work? If I put a tube & starter in top or bottom ballast & turn machine on or while machine is on etc it blows both instantly with a quick flash??? I'm using the correct starters & tubes. It's both acting the same which I find odd? I've never had this issue with a ballast on any machine? I've changed the Backpane Board, Super Board, Hopper etc with no change. Machine wiring looks clean inside excet 3 wires have been cut & reconnected from long ago, pic attached? All button lights work?
Any suggestions would be appreciated.

Title: Re: IGT PE+ 1070C Blows flouresent tubes & starters top & bottom?
Post by: Jim on February 11, 2023, 10:16:58 AM

there are only three items in that unit, bulb,starter and ballast.  I have seen this before, the ballast is bad.  check and make sure you have 115vac going to the ballast, if so, then replace the ballast.

Jim

Title: Re: IGT PE+ 1070C Blows flouresent tubes & starters top & bottom?
Post by: danatlvc on February 11, 2023, 02:40:23 PM

Thank you for the great info.
I Spent all day dismantling & checking for wire continuation, shorts & voltage. All are good. I'll change the ballast tomorro. I find it odd that both are bad doing the same thing? With these old metal ballast in my past they just go bad & don't work,. There's always something new to learn even with simples of machines. I'll let you know outcome tomorrow.
Thanks again
Dan.

Title: Re: IGT PE+ 1070C Blows flouresent tubes & starters top & bottom?
Post by: danatlvc on February 11, 2023, 04:06:56 PM

That was it  :thank_you: