New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: jonbbrew on October 16, 2023, 09:36:37 PM
-
Are these the correct sockets and LEDs for a S2000 backlight reel?
socket
https://www.spininc.com/socket-igt-s2000-backlit-reel-12006690 (https://www.spininc.com/socket-igt-s2000-backlit-reel-12006690)
and
LED bulbs
https://www.spininc.com/led-t5-12-vdc-mini-wedge-igt-button (https://www.spininc.com/led-t5-12-vdc-mini-wedge-igt-button)
or
https://www.spininc.com/led-t5-6-vdc-mini-wedge-igt-williams-button (https://www.spininc.com/led-t5-6-vdc-mini-wedge-igt-williams-button)
-
jon,
It depends on what driver board you have, on the back wall, behind the reel shelf.
One board is for incandescent lamps, while the other is for LED bulbs.
Post a photo of your reel light driver board.
-
Sockets are correct. I use these bulbs (same as S2000 buttons): https://www.spininc.com/lamp-led-lamp-t10-12-volt-led-igt-s2000 (https://www.spininc.com/lamp-led-lamp-t10-12-volt-led-igt-s2000)
The last ones you posted link to are 6v. DON'T use those!