Pog dip switch settings

[mlottk@yahoo.com]

I have a older Leisure time POG model 19CSTS-A, it was set up to play on demo mode with no validator. I had the 580 chipset in it and switched to the 510. The 510 does not have the demo mode so I purchased a PA7-U1PB4-USD6 validator hoping I could just feed bills in it so I can play my machine. The validator accepts bills but flashes the green lights 2 times. I cannot get the dip switch settings correct and have tried pulse, serial 1 and serial 2 with no luck. I know very little but enough to where I could play my machine before changing out the chips. The bad thing is the original 580 chips the security one the little teeth one broke off so now I can't even play. If anyone could please help me it would be greatly appreciated.

[8lines]

POG T340+ DIP-SW:

DIP Switches: (switch ‘ON’ for choice)
1 - Cabinet style ‘A’
2 - Cabinet style ‘B’
3 - Cabinet style ‘C’
4 - Microtouch touch screen
5 - Interaction Systems touch screen
6 - Unknown
7 - Autoplay
8 - Boot Diagnostics
9 - Unknown
10 - Unknown
11 - Unknown
12 - Unknown

Function of Ports:
#1 port (farthest from DIP switches) – Printer
#2 port – Modem
#3 port – Card Reader
#4 port – Touch Screen
#5 port (closest to DIP switches) - Display

Printer settings for Citizen printer: 2400 baud, 8bit, no parity, XON/XOFF

[pinballfixer2]

I am working on 2 of these .
Same issue,  Bill acceptor takes bills, but game wont take credits.
Also tried all possible pulse settings, no go.
Have to turn off "harness Disable" switch for acceptance
Games do play with coins.
Is there some compatibility setting ?
Are these not compatible?
If not, what is ?
one has an Apex 7600 acceptor
one has ICT PA7-U1PB4