wms bb1 bb2 24 volt power supply

[ok2bnvus2]

i dont know if this will help anyone or not but i had a hard time finding a new wms power supply mine went awhile ago i know you can recap them but my eyes and hands are old lol after several websites saying they had them in stock and not having them even one website that paypal put a hold on my card for 30 days and never recieved power supply this is a cheap and effective way to replace power supply this has been on for at least 3 weeks no problems both b/v and printer work great minimal install knowledge use old power supply harness remove 4 screws undo eletric wires from old supply and conect tan wires to positive on new supply and black wires to negative last and least your 110 line wires      link to supply    https://www.amazon.com/Supply%EF%BC%88SMPS%EF%BC%89Constant-Transformer-220VAC-DC24V-Monitoring-Industrial/dp/B0782RGQJ9/ref=sr_1_2_sspa?crid=43K6ZE6OMXBE&keywords=24%2Bvolt%2Bpower%2Bsupply&qid=1674952073&sprefix=24%2Bvolt%2Bpower%2Bsupply%2Caps%2C88&sr=8-2-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVjVKMjdCUjY1S0tLJmVuY3J5cHRlZElkPUEwNzE4MDI3MU9LTlRSQVpCOVhCJmVuY3J5cHRlZEFkSWQ9QTA5OTY5NzkzMEFVUlBFSFJOSTJDJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

[Eddiie]

Cool.  Thanks for that.

I actually took out the BB1 PSUs and put a BB2 PSU right there where your 24V is.. Had to extend the wire harness...   It was years ago..

[ok2bnvus2]

very nice i was running hard luck finding one but left all original harnnes intact incase supply didnt work