New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Machine issues: single red flash, no readouts.  (Read 1359 times)

0 Members and 1 Guest are viewing this topic.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Machine issues: single red flash, no readouts.
« on: April 11, 2023, 02:57:25 PM »
Hello, hopefully this is the right place. i also bought a non-working s2000 5x pay.  I have replaced the mpu and now just have single red flash. i was getting a netplex error on the front but now I have no readout. occasionally the bil val will cycle. lights work. All the fuses i could find are good. As far as i can tell, the varta has been replaced with a button style. Please help.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #1 on: April 11, 2023, 03:25:08 PM »
update.. i dc'd the mpu and now the bill val cycles and the display reads "display's netplex link is down." i think i am missing something simple...hopefully

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Machine issues: single red flash, no readouts.
« Reply #2 on: April 11, 2023, 03:28:30 PM »
 :NLG_WELCOME:

You probably should have started a new topic, but that's OK, a mod will likely do it for you.

Not sure what you mean when you say you "dc'd" the mpu.  Do you still have a blinking red led on the MPU board?

TOPIC SPLIT - NEW TOPIC STARTED BY MODERATOR

« Last Edit: April 12, 2023, 08:46:53 AM by shortrackskater »

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #3 on: April 11, 2023, 03:32:41 PM »
i mean i disconnected the mpu just to see if the display and bill val still functioned

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #4 on: April 11, 2023, 03:33:55 PM »
and yes still have red light flash when the mpu is plugged in

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Machine issues: single red flash, no readouts.
« Reply #5 on: April 11, 2023, 03:34:57 PM »
When it's installed you still have a blinking red light?  Post a picture of the MPU board so we can see the game chips.  Photos have to be less than 1MB in size to post, so resize as necessary to get under that limit.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
MPU.....Need help
« Reply #6 on: April 11, 2023, 03:50:03 PM »
mpu

Offline lookes

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 265
  • Reputation Power: 20
  • lookes New User barely matters.lookes New User barely matters.
  • Gender: Male
Mpu..Need help
« Reply #7 on: April 11, 2023, 03:53:07 PM »
Where is the BASE chip?
I Repair IGT 50X, 1270, 039, 044, and S+ MPU's. Contact me at slots@lookelectronics.com for more information.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Mpu..Need help
« Reply #8 on: April 11, 2023, 03:54:35 PM »
i am sorry, i don't know the answer to that or even where it would be

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Mpu..Need help
« Reply #9 on: April 11, 2023, 04:07:39 PM »
okay i see where it goes. is the base chip game specific?

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3854
  • Reputation Power: 235
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Mpu..Need help
« Reply #10 on: April 11, 2023, 04:23:49 PM »
Yes. It has an S+ reel chip so you just need a SB001000.

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Mpu..Need help
« Reply #11 on: April 11, 2023, 04:29:55 PM »
Yep, it won't work without the Base chip.  It should be SB001000 in your case.

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Machine issues: single red flash, no readouts.
« Reply #12 on: April 11, 2023, 05:19:08 PM »
If you don't have the SB001000 base chip that belongs in there I'd remove the SS chip and get a SB100050 2CM Dbl 5X Pay base chip for it instead.  That allows you to select different payback %'s where the SS chip with the SB001000 is a fixed payback %.


Offline erbs

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 868
  • Reputation Power: 75
  • erbs Has a powerful will.erbs Has a powerful will.erbs Has a powerful will.erbs Has a powerful will.erbs Has a powerful will.erbs Has a powerful will.erbs Has a powerful will.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #13 on: April 11, 2023, 05:25:34 PM »
Looking at your pic there is a leg on chip GM2 that is not in the socket.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #14 on: April 11, 2023, 05:48:29 PM »
great thank you for the help. I  will get those and update

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #15 on: April 11, 2023, 06:00:21 PM »
and replace the gm2 chip. thank you erbs. i read on here to replace the sb1000 with the sb100057

Yep. If you own an S2000 the clear and key chips are good to have, a must really. At the same time grab the SB100057 and replace it with the SB1000 after removing that SS chip. Set the machine back up to the denom and percentage you'd like and you're good to go. I recommend a battery swap during all this also.

You're running 365 SG chips, which will work, but 363's are the 'go-to' if you plan on numerous game changes in the future, those are tried n true.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #16 on: April 11, 2023, 06:09:29 PM »
If you don't have the SB001000 base chip that belongs in there I'd remove the SS chip and get a SB100050 2CM Dbl 5X Pay base chip for it instead.  That allows you to select different payback %'s where the SS chip with the SB001000 is a fixed payback %.

remove the SS chip and replace with SB100050 2CM Dbl 5X then which base chip do i get?
i am sorry for all the dumb questions, i truly appreciate the help

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3854
  • Reputation Power: 235
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #17 on: April 11, 2023, 06:12:24 PM »
The stepper base SB100050 goes in the 40 pin blank base socket, just remove that SS chip.

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Machine issues: single red flash, no readouts.
« Reply #18 on: April 11, 2023, 06:16:38 PM »
And you don't need to replace that GME2.  Just remove it, straighten the pin and put it back in.  Those 523's GME's are fine, there's no need to replace them.

Offline mrjgonzalez

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 11
  • Reputation Power: 0
  • mrjgonzalez New User has no influence.
  • Gender: Male
  • NLG
Re: Machine issues: single red flash, no readouts.
« Reply #19 on: April 11, 2023, 06:26:16 PM »
got the gm2 reseated. thanks again.
I won't need an SS chip at all?
I just need to replace with SB100050 2CM Dbl 5X?
I only need to purchase one chip?

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal