Some S2000 Notes for Troubleshooting.

[Stayouttadabunker]

I just found some notes I took while I was doing some troubleshooting on my S2000 Double Diamond machine.
Pretty sure I turned off the power each time...zero hot-swapping.
I don't know how long ago I did this...
I'd thought I'd share...>>>

Powered ON the machine = 3 reels spin backwards from right to left.

Removed MPU 200 I/O Molex = "Meter - disconnected".

Disconnected Backlit board behind reel shelf = No backlighting of reel strips but game works fine.

Molex Plugged in Belly Door 801 I/O board is loose and unseated = "Machine Type Mismatch".

Unplugged Belly door 801 I/O board = "Coin-In Jam".

PLugged but unseated 801 I/O board = "Coin-In Jam".

Long Reel Glass Display unplugged on right side = No errors...Game works without display.

Unplugged Ribbon Cable to Blue VFD Display = No Error...Game works without Display.

Unplugged Black Molex from Blue VFD Display =  "NETPLEX Link Is Down".

Plugged back in Black Molex to VFD Display = "Display Passes Self-Test".

Unplugged 2-pin Power Harness from VFD Dislay = "no diSP" on right hand side of LED display.

[jonbbrew]

I just found some notes I took while I was doing some troubleshooting on my S2000 Double Diamond machine.
Pretty sure I turned off the power each time...zero hot-swapping.
I don't know how long ago I did this...
I'd thought I'd share...>>>

Disconnected Backlit board behind reel shelf = No backlighting of reel strips but game works fine.

I need help/pictures with this one as my S2000 has the reels, but wrong strips as no backlighting but lights still dont come on.