Bill Validators, Currency Acceptors and Printers > JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators
Bill acceptor will not take bills CDS reel deal UV-1510
(1/1)
ronfarren:
Looking for some suggestions to get a WBA-11 (maybe 10) bill acceptor in a CDS reel deal poker machine UV-1510. The unit will not recognize a bill inserted - does nothing.
The bill acceptor tests fine using the dip switch process, and the unit lights up in the front of the machine when the machine is powered on. I have been through the setup menus and the device is set to quarters, and bills are all enabled to be accepted.
I purchased this machine, the previous owner stated he replaced the battery and added the bill reader when the screen on the device died.
Is there something else I need to do here or any suggestions. I read through these forums some discussion on set chips.
any suggestions or help appreciated.
thanks. Ron.
Dvbit2017:
Not sure if this applies to your machine. I have a CDS reel slot and I had the same issue. I used WBA BV and I had to get an updated EEPROM for the transporter V3.80 ID003. These CDSs use ID003
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |