New Life Games LLC
**Reel Slots** Gaming Machines => IGT Reel Touch Games => Topic started by: Jackpot on August 08, 2016, 02:11:55 PM
-
Good Day!
Does anyone have a cheat sheet for setting up the reel touch game? Using Keys and clears etc, etc. I have to set up a reel touch that has reels and the video screen up top, see photo, Lucky Larry's Lobster Mania. The lower MPU was destroyed by Varta battery acid, the attached board above the mpu with the game eproms is ok. This is a none coin machine with no hopper in it, bill valator only I guess with printer that is not needed but it is there. I never set one of these up before and was hoping one of you selling these, might have a cheat sheet put together that I could use to set it up, which Keys to use and which clears and the steps to set it up without the hopper and cashless. Here's to hoping........... :cool_thumb_up:
Jackpot
-
If you haven't cleared the machine it should be a simple matter of inserting the new MPU and clearing a couple errors with the jackpot reset key. When the error comes up after booting, open the main door and an alarm will sound, then turn jackpot reset key 3 times at which point an instruction to hold the reset button for 3 seconds will show up on the VFD display. Follow the those instructions and if the machine shows up with a second error, repeat the process. After 2 cycles the machine should be fine with whatever settings were on it before the board went bad
-
God Bless you cowboygames! If this works, I am going to send you my first born along with all his kids!
I have been sweating this for a bit so this is really good news, we will see just as soon as the replacement MPU gets here.
Thank You
Jackpot :thank_you:
-
No problem Jackot, all settings are stored on the mother board and you're using all the same chips from the old board, it should be a quick reset