New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Brett on February 05, 2018, 07:43:01 PM
-
Well lets see. I reconnected two wires on the coin hopper, the green and nother striped one. I don’t know f that nis right or wrong. When i went to put it back I saw that the plug from mthe machine was loose. How is it connected to the machine? I don’t know. Anyone out there have the answer?
Next to try to fix is the coin compartor. My machine works on quarters. I put one in the compare slot. The coins keep dropping straight through. What could be the problem? Should I take it apart?
-
Turn the comparator sensitivity control fully counterclockwise and see if it allows coins to be accepted.
What is the hopper problem?
-
What errors are showing in the far left display? Probably a hopper error with that plug not mounted . All errors must be clear and the coin mech switch on mpu must be in the up position.
-
Sorry thought this was a 6000 and error would be in left display . I see it is a 5500. Still could have errors, let us know
.
-
I'm not sure what the error code is right at this time. I will find out tonight when I put the hopper back in. I will check the coin comparitor also to night. I find that the bunch of wires has a single black wire coming out of the molded plug. It's to short to go any where so I gather it is the ground and will need to be grounded when I reinstall the hopper plug into the cabinet?
Thanks
Brett