New Life Games LLC

**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: Matt C on October 23, 2015, 12:16:13 PM

Title: Re: Sigma questions
Post by: Matt C on October 23, 2015, 12:16:13 PM

Hi I just have a couple of hopefully easy questions for you guys, First I have a meter cut check wire message ? My first machine I have no clue. And second there are not one but THREE brass keys on the side ,again no clue assuming one is reset . But failing to do anything,the guy I bought it from said the keys have to be turned in some kinda sequence.?? Please if there is anyone out there that can help it would be greatly appreciated. Thanks again 

Title: Re:Sigma questions
Post by: cowboygames on October 23, 2015, 12:29:48 PM

Hi Matt, to help you out we will need to know what type machine you have. What manufacturer? What platform from said manufacturer? If you don't know then post pictures of the outside front, inside with the door open and handle side where the manufacturers plate usually is. We'll go from there...

Title: Re: Sigma questions
Post by: Matt C on October 23, 2015, 02:12:37 PM

Hey thanks for the fast reply this is the pictures I have now but I will shoot you more tomorrow .Thanks again

Title: Re: Sigma questions
Post by: Yoeddy1 on October 23, 2015, 02:29:17 PM

That's not an S2000.  Maybe an early S+ or S.

Jason

Title: Re: Sigma questions
Post by: Jim on October 23, 2015, 02:34:37 PM

that's a Sigma machine,  the three key functions are,  closest to the front, is the reset, next is the meter lamp, last one is the last game played.  to get rid of the meters error, turn the first keyswitch one time, if there are no other errors the machine should come back to life. 


Jim

Title: Re: Sigma questions
Post by: Matt C on October 23, 2015, 03:06:46 PM

Okay I will try that again,could it be a optic door sensor if that doesn't work?

Title: Re: Sigma questions
Post by: mustangjeep on November 19, 2015, 02:43:41 PM

Here's a quote for the manual-

Message-
Meter Cut Check Wires

Description-
one or more of the mechanical meters is disconnected or malfunctioning.

Fix-
confirm all connetors are firmly fastened to the meter assembly.
OR
check for broken or fryed wires
OR
verify there is 12 volts at the distribution PCB location CN25 pin 7.



I'll go look at my machine and see where CN25 is at for ya

Bud

Title: Re: Sigma questions
Post by: Matt C on November 19, 2015, 02:48:12 PM

Thanks again hopefully I can get her up and running soon..

Title: Re: Sigma questions
Post by: mustangjeep on November 19, 2015, 03:13:59 PM

Here is a picture of CN25 location is on the door.

Title: Re: Sigma questions
Post by: Matt C on November 19, 2015, 06:07:31 PM

Thanks a million everybody I'm going to try to voltage on those pens and see where I'm at far as that goes and then maybe I can figure out what part I need so I can get them off of you talk to everybody soon thanks

Title: Re: Sigma questions
Post by: mustangjeep on November 21, 2015, 01:06:01 PM

Hey Matt did you get the machine working?
Check the voltages on the wires?


I can get you whatever parts you need off this parts machine and CHEAP CHEAP CHEAP are the parts :)


Talk to ya later,


Bud