New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => SIGMA Video Games => Topic started by: BEAVE on August 16, 2020, 05:04:49 PM
-
I have a Sigma PT-2B video poker machine and when I go into the settings and enable the bill validator and then reset to play mode it automatically goes back to disabled. I'm pretty sure SW1 #4 & #7 switches have to be turned to the ON position but I can't do it from that video setting. I took the board out and examined it but didn't see anywhere to adjust this. Can someone lend me a hand so I can get this machine to take bills please. I know there is an updated board in it because the cpu is a Vx4, when the board that it originally came with it should of been a Vx1 or Vx2 from what I have researched. Help neeeeeded :)
-
Look on the board for unpopulated spots, sometimes the dipswitch banks won't be there and you can put jumpers in jumping them straight across is on and not if off. Post a picture of your board and I can see if I can help