**Reel Slots** Gaming Machines > SIGMA Reel Games
SG 300 Free-N-Easy (maybe not so easy?)
TODSZX:
Hi All,
Need some help please.
Got this Free-N-Easy Sigma SG-300 and this is what it does and doesn't do.
It turns on and lights up. There are a few LEDs on the upper wheel that need replacing.
The reels spin slowly and stop
The display says:
Now Self Testing
Please Wait
(sometimes it goes nowhere from here. I just turn the machine on and off again and it says the same thing but continues to the next step)
The display says:
RAM Data is Wrong
Turn On-Off Reset SW
(turning the key continues to next step)
The display says:
Turn Reset Key
On-Off Two Times
(turning the key twice continues to next step)
The display says:
Game Loading
Please Wait
The reels spin fast and stop in there home position I believe.
Blue 7 Blue 7 White 7
All looks good at this point and it is ready to play
Winner Paid shows 0 and says, "Insert Coin"
The machine accepts up to 3 quarters. Registers each coin and make a sound.
The Spin button is lit up but does nothing when pressed.
I've replaced the switch, No change.
I've replaced the SG88 Distribution Board. No change
I've checked the voltage and voltages are what they are supposed to be.
I've tried the RAM clear and doesn't seem to change anything.
Was hoping for a comment or suggestion.
Thanks much,
Todd
TODSZX:
Photos part 2
The second photo is what I get by turning the reset key.
Pressing the (Cash Out) button returns it ready to play mode.
Pressing (Spin Reels) button does nothing.
It's got to be an easy fix???
Todd
Mr. Dinoman:
Go into the programming mode and see if all the button are working...If not, most likely you MPU has issues like the driver chips for the switches...
Jimmy
TODSZX:
Hi Jimmy,
Thanks for suggesting this. Here's what I've discovered:
With the machine in Programming mode, all buttons do what they are supposed to do except the (Spin Reels/Repeat Bet/Play Wheel) button.
I can toggle back and forth through all the menu headings but pressing the (Spin Reels/Repeat Bet/Play Wheel) button does nothing. It is lit up but won't select any options.
I did change out the switch but nothing improved.
What do you suggest?
Thanks,
Todd
TODSZX:
IT WORKS!!!!!!!!!!
I don't believe it.
The switch was bad.
Apparently the replacement switch was bad too.
The third switch works!!!!!!!!
Thank you Jimmy.
Your menu comment got me wondering why all the other buttons worked but not this one.
I checked the wiring diagram from Module 6 in my Sigma SG-300 book and the wires checked out.
I knew it had to be a simple fix.
Just needs a bill validator and replace 5 tiny LEDs on the upper wheel and it will be perfect.
I'm so happy. One down, two to go.
CDS Easy Street (Needs Battery & Birthing Chips)
VLC Winning Touch (Needs Touch Monitor Replaced)
Later,
Todd
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |