**Video Poker, Keno, Slots, 21** Gaming machines > WMS Williams Video |
BB3 Games Playing On BB1 Conversion To BB2 |
(1/4) > >> |
T:
For those of you Interested: Could it be done? That question bugged me for some time. I got a lot of "definitive maybes". Jim Masonis was pretty sure it could be done so I started buying the parts I needed some time ago. With that being said many, many thanks and Kudos to Jeff (Idesign) for figuring it out. Here's what I needed for parts Initially Top Monitor that had a DVI Port. BB2 Power supply Emotive Light Box Whatever special cables are needed. And of course a BB3 CPU 3.2 Jeff was kind enough to take on this challenge. What he discovered was, that a BB2 Power supply was not needed however, another BB1 power supply was. It sounded like a BB2 power supply could be used but the Remote switch may have been a challenge. Jeff was able to add the BB1 PS and make a cable so the BB1 PS and BB3 CPU connected with power. He made me a splitter cable for the Emotive Light Box since I did not have a Power Slot open. He tried all of this on his BB1 Conversion and it worked. He made up the Cables for me and YES it works. I have attached some pictures. First picture shows Gorilla Chief II. Second Picture shows Gremlins on regular dual 22s. Third photo shows Gremlins with 32" vertical monitor. Photo 4 shows Emotive Light box and cables. Photo 5 shows Power Cable from BB1 PS to BB3 CPU 3.2 I am sure there is something I forgot but there it is for those of you Interested. Thanks again JEFF!! |
idesign:
Emotive Light Box is not needed for games like Gremlins that use a vertical monitor. |
gunnerbill:
Great Topic, there is a way to by-pass Emotive lighting board. By soldering a permanent jumper. This will fool the game into thinking there is an emotive controller installed saving on use amperage/voltage |
gunnerbill:
Jeff, Can you post the pin out for the cable you made for the BB1 so others can make there own conversion in the future. I had made mine using an old Gen1 printer plug and repinned it so I could provide power to the BB3 using the existing BB1 power supply. It is the same size Molex plus as Power supply and backplain. I will take some photo this week and post. The cable connects to the Bulkhead Board.[size=0pt][/size] |
coolwavepic:
IF you already have a BB2 (not BB2e), do you need a different power supply/molex connection or will the one in there already work? |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |