New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Konami Games => Topic started by: Dirtguy on September 16, 2020, 11:18:54 AM

Title: Konami BV WBA to Mars Switch Problem
Post by: Dirtguy on September 16, 2020, 11:18:54 AM

Hi
I have an Advantage + Konami that I am trying to switch out a WBA for a Mars BV.  When I got the mars BV, I installed it and when I tried to connect it , it had a male end on BV side, and a male connector on pigtail from mother Bd. So I got a pigtail from a konami advantage 5 that had a female end on it. Now I can connect the BV. I have power to the Mars, will cycle but I get these errors: Main Door open, Bill Door Open, Main Door Accessed, Bill Door Port, BV Device Failure, BV Comm Error. The pigtail from the MB has the main plug, and a red&black 2 wires marked on&com, also a 3 wire plug marked Bill Door that I can not find anything to plug this into. Coming out of the Bill Acceptor I have the Main Plug, a White wire with red black & white connectors, and a Black wire with red black & white connectors. What needs connected where??? I appreciate any help, Thanks Dan

Title: Re: Konami BV WBA to Mars Switch Problem
Post by: Dirtguy on September 18, 2020, 07:28:16 AM

I guess I'll put the WBA back in for the fix.

Title: Re: Konami BV WBA to Mars Switch Problem
Post by: Podfun on October 21, 2020, 04:23:23 AM

After doing the same thing just go into your settings and change the bv settings to the other one it should give you the options for default bv settings when you ram clear it or go into settings when door is open to get to in the advanced settings