New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: WESTCOAST on November 10, 2020, 05:55:36 PM
-
Anyone ever try this repair?
http://antelopearcade.com/files/Ken%27s%20Korner/Ceronix%201492%20Monitor%20Repair%20Guide.pdf (http://antelopearcade.com/files/Ken%27s%20Korner/Ceronix%201492%20Monitor%20Repair%20Guide.pdf)
-
Some of those parts are no longer available. Ceronix doesn’t offer Repair for the 1492 Ceronix any more.
-
I found all the caps listed on mouser. Plus the three large 150uf 250v caps.19 caps total.$21 total shipped. Ill be receiving them friday.
-
It worked. Just replaced all 19 caps. Took a little while to warm up. But it worked.
-
How long did it take to power up to a picture? That sounds familiar.
-
How long did it take to power up to a picture? That sounds familiar.
Here are what my notes tell me. If I have a slow picture to come on, to try this. First is to change out the Quad Amp IC at #146, LM324, or it could be the V & H Control IC at #218, LA7851 or LA7850. By changing these out, the picture powered on in 10 seconds or less. These both can be found on EBay at a very reasonable prices.
-
i will look into that. it takes about 2min to show an image ant then grows slowly,
-
my hold buttons are not working.need to fix that first.
-
So the monitor is working great now. I replaced I more cap. Info on reply#4 of this thread http://newlifegames.com/nlg/index.php?topic=15961.msg85245#msg85245 (http://newlifegames.com/nlg/index.php?topic=15961.msg85245#msg85245)
Thanks Amechanic
-
I forgot about that small cap. That piece is no longer available, so I just put that style cap on, and it works great. I’m glad I was able to help yea out.
-
I ended up putting a 10uf 50v. I couldn’t find a 16v. It’s working fine. You think that’s ok? Or should I order a 16v?
-
I think it should be fine. I’ve always been told to go a little bit over, then to go the other way. I ordered my self a cap kit in a plastic organizer tray box, that had about 20-30 different caps. Some I’ve never used, but you’d be surprise how many that I would.
-
Does anyone know if these monitors have a degaussing function?
-
Does anyone know if these monitors have a degaussing function?
The 2 header pins at 242 and 243, right next to the fuse are where the plug hooks up for the degaussing curcuit...
-
Does anyone know if these monitors have a degaussing function?
The 2 header pins at 242 and 243, right next to the fuse are where the plug hooks up for the degaussing curcuit...
so they dont come stock?you think the old solder gun trick will work?
-
Does anyone know if these monitors have a degaussing function?
The 2 header pins at 242 and 243, right next to the fuse are where the plug hooks up for the degaussing curcuit...
so they dont come stock?you think the old solder gun trick will work?
It should.
-
Thanks to all your help.
-
Thanks to all your help.
Your welcome. Spread the knowledge.
-
...you think the old solder gun trick will work?
This is a link to the "ol' soldering gun trick"for degaussing a video screen...works perfectly too! :rotfl: ...>>>
https://youtu.be/IeJjevtcIsY (https://youtu.be/IeJjevtcIsY)