New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: coolwavepic on July 08, 2022, 12:20:15 PM
-
Bought 3 ticket printers off of ebay that said they would work with WMS. All 3 didnt work. Its not the machine as I tested a different printer and it worked.
So if anyone has a working WMS ticket printer, let me know. Send PM. Thanks!
-
I have a few here from ballys that should be the same protocol and work fine for you
-
Just an FYI when shopping for used printers: Depending on the ID tag on the side, a lot of Netplex printers were OTP for IGT (One Time Programmable) and can not be reflashed. JCM did that to reduce costs on the IGT order, I guess (per JCM Tech Support).
-
I’ve already got 3 from eBay that said it would work and they don’t. I’m tired of collecting printers and just want one that works for sure. :banghead:
-
Can you do a self test print to see what firmware is on the printers?
-
Rick - When I first got the printers, I think I sent you a photo of the firmware. I just moved and when setting everything up at the new place, I forgot that this machine didn't have a printer. Let me see if I have the picture of the printer out, otherwise I will find where I put the printers and do it again.
-
Here is the picture. The one marked not working same info on all 3 printers.
-
Yeah, anything GUR is serial, you need the GUN one. Shipping is so expensive though, I have a friend who can flash those here locally. Maybe someone local to you can flash them to the right firmware? You need a special cable to flash it.
-
I agree with rickhunter, although the WMS games utilize an RS232 printer, the firmware is a netplex version for WMS games, that is why the baud rate on the working printer is 19200, which is a normal baud rate for any netplex printer, the reason the other does not work is because it is an RS232 firmware as evident by the 9600 baud rate. Flashing the Gen2 Universal printer does not require a special harness though, the printer can be flashed in the game via a USB cable. The only problem I foresee that may happen is that the printer may not be set up to receive netplex firmware, their is an update to the universal printer which allows it to accept either netplex or RS232 firmwares. But to do this you need 2 files that will need to be downloaded into the printer and the FLDFU 2.2.3 at a minimum to do the update.
-
Does anyone know what it takes to flash the Gen 2 RS232 printers for WMS?
I assume a flash program, the correct cable and the flash file?
I have a couple of printers here but have no idea what firmware is in these.
-
LOL ebay is hit and run with what you buy , unless you know the person , its gamble lol , I have one in my bb2 machine that I dont use it right now Charles , if you want it brother you are more then welcome to have it , let me know , ALI
-
Yes to all 3. You can print a self test page and it say what firmware is on the printer.
-
LOL ebay is hit and run with what you buy , unless you know the person , its gamble lol , I have one in my bb2 machine that I dont use it right now Charles , if you want it brother you are more then welcome to have it , let me know , ALI
If you want the 3 I received I will send them to you. Lol. Send me a PM.
-
I haven't done this in awhile, like back in 2010. You need program FLI Download (Install_FLI Download V200019BetaC) or 2.2.1
It takes about 3 mins to Download
Nexplex Ticket Printer
Hook up Ticket Printer and make sure that there paper in the Ticket Printer
Or it won’t compete download
Turn on the switch on Power Supply for the Ticket Printer
(Note green light on Power Supply shows you that the power is on)
The Ticket Printer should have a green light on at this time
And on the computer on the upper left side there will be a green check mark
Click on Start Auto Download and a hand will show with an x on it
That means it downloading at that time
(Note it saids Printer Error in the middle of the download that means the printer head switch is not making connect)
Just before it done it will kick out the and wait until you see STP V 6.1.1
MAKE SURE YOU TURN POWER OFF or will blow Ticket Printer MPU or
Daughter Board and there not cheap to replace
Put the another Ticket Printer in and put in paper and turn on
Then Click on Abort Load then you will see the green check mark on the left
Now you can click on Start Auto Download
Test Ticket Printer to make sure that it works properly
The cable our Locker #14 Bank 229-01 the wires in the game long enough
So you can get the plugs
Non IGT Ticket Printer
Click on Icon SIUD Load
Download takes about 3 mins
Startup Help
Click ok
Then Click on 24.VFX and click open
Download Configuration
Comm. 2 on this computer
Hook up Ticket Printer and make sure that there paper in the Ticket Printer
Or it won’t compete download
The Ticket Printer should have a green light on at this time
And on the computer on the upper left side there will be a green check mark
Click on Start Auto Download and a hand will show with an x on it
That means it downloading at that time
(Note it saids Printer Error in the middle of the download that means the printer head switch is not making connect)
Just before it done it will kick out the and wait until you see SR.2.4.0
MAKE SURE YOU TURN POWER OFF or will blow Ticket Printer MPU or
Daughter Board and there not cheap to replace
Put the another Ticket Printer in and put in paper and turn on
Then Click on Abort Load then you will see the green check mark on the left
Now you can click on Start Auto Download
Then go to any Konami, Ticket Printer dips should be 7and 9 on
Gen Ticket Printers
(Note for game play on the Dip SW’s Pack Nexplex #2 ON and RS232 #1 &2 ON)
Before you can Download the #2 Dip SW is ON ONLY
Next make sure there is a Bottom Rail in the Ticket Printer (note there a cut off or short Rail in the box ,if needed)
Then apply Power and the Data Cable (4 pins connector)
Then Feed the paper in the Ticket Printer
(note there must be no TILTS on the printer or the Ticket Printer won’t Download
like no paper or Ticket Printer Door Open)
Click on Icon FLI DOWNLOAD (Blue Icon on the top left of the screen)
Download takes about 3 mins
Click on Preferences Box
Then Click Select Firmwaare
Choose the Program Click Open click on middle box click Save then click on upper right box
COMM 1 show Status
The Ticket Printer should have a green light on at this time
And on the computer on the upper left side there will be a green check mark
Click on Start Auto Download and a hand will show with an x on it
That means it downloading at that time
Just before it done it will kick out a ticket with the version on it
Wait for about 20 sec. then pull power
Put your next Ticket Printer
And click on Abort and Click on Auto Download (and do same thing again)
Gen Ticket Printers
(Note for game play on the Dip SW’s Pack Nexplex #2 ON and RS232 #1 &2 ON)
Before you can Download the #2 Dip SW is ON ONLY
Next make sure there is a Bottom Rail in the Ticket Printer (note there a cut off or short Rail in the box ,if needed)
Then apply Power and the Data Cable (4 pins connector)
Then Feed the paper in the Ticket Printer
(note there must be no TILTS on the printer or the Ticket Printer won’t Download
like no paper or Ticket Printer Door Open)
Click on Icon FLI DOWNLOAD (Blue Icon on the top left of the screen)
Download takes about 3 mins
Click on Preferences Box
Then Click Select Firmware
Choose the Program Click Open click on middle box click Save then click on upper right box
COMM 1 show Status
The Ticket Printer should have a green light on at this time
And on the computer on the upper left side there will be a green check mark
Click on Start Auto Download and a hand will show with an x on it
That means it downloading at that time
Just before it done it will kick out a ticket with the version on it
Wait for about 20 sec. then pull power
Put your next Ticket Printer
And click on Abort and Click on Auto Download (and do same thing again)
-
Is this printer a Gen 2, or Gen 2 Universal?
-
No one has a working printer they can pull out of a BB2?
hahaha
I might have one. Will look.
In my BB1 I select Ithaca 850, on all others I select Netplex...
Not sure why.
-
Does anyone have the Gen 2 RS232 firmware for WMS and IGT?
I would like to try and flash a printer, I believe I have everything else that I will need.
-
Found a working printer. Thank you Ali!
-
I am glad it worked out , tnx to Darrell for saving the day.
Charles you always help everyone , for change let someone help you brother , ALI
-
Yes Thank you to Darrell as well!
-
Found a working printer. Thank you Ali!
That's a pretty printer! I love it.
I may need to get a few of those.
congrats on your find.