New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Konami Games => Topic started by: 61Wally on July 26, 2022, 01:23:18 AM

Title: Advantage 5 topper wiring
Post by: 61Wally on July 26, 2022, 01:23:18 AM

Great Evening to All. I’m trying to wire up a poly gone topper to my Konami. I enclosed some pictures of the plugs & board. I know where candle connector goes and I put the 24vac to red/black. The only thing that lights up is the back lighting. I’m trying to get the outside colered lighting to function. I tried researching under Downloads and toppers and was unsuccessful. Any thoughts would be appreciated.

Title: Re: Advantage 5 topper wiring
Post by: 61Wally on July 26, 2022, 01:35:54 AM

Here’s the picture’s!!!

Title: Re: Advantage 5 topper wiring
Post by: Stayouttadabunker on July 26, 2022, 06:12:31 AM

You put 24VAC to it? You probably burned it out. :burningresistor:
Look closely at the photo I flipped below. :sherlock:
I highlighted something in your photo that is etched onto your circuit board.
I believe it says "24VDC"....that's direct current DC voltage...not alternating AC voltage.

Click on photo below to enlarge if needed....>>>

Title: Re: Advantage 5 topper wiring
Post by: 61Wally on July 26, 2022, 03:17:26 PM

My mistake, I have 24vac to it and it lights up the logo. I can’t get the outside ring to go. It came to me in a new box/package, still could be bad. Do Any of the gray wires get jumped or vdc applied?

Title: Re: Advantage 5 topper wiring
Post by: 61Wally on July 26, 2022, 03:19:43 PM

24vdc is what I’m using, Sorry mistyped.

Title: Re: Advantage 5 topper wiring
Post by: RodneyK on July 26, 2022, 06:35:40 PM

Probably not much help as I have never wired one of these. But, on the Polygon toppers I have dealt with it took 24VDC and 12VDC to get both parts going. I do not recall what part got what voltage.