New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Akriegs on August 06, 2022, 10:39:04 AM
-
I picked up a S-2000 and when i fist turned the machine on i was greeted by RAM error. I followed some peoples instructions found here to turn JP key 4 times. i get to the reset button for 2-3 seconds and then i get please close main door . i took the board out the battery was corroded. I removed and look like one of the traces was bad. I did not have schematics so i assumed the trace went straight. I ran my own jumper connections but wanted to see if anyone can confirm the jump looks correct.
Does anyone have the schematics for this board?
-
UPDATE>> i plugged it in and i am still getting Please close main door.
Any suggestions i should check on the board?
Anyone selling a similar board?
-
Sorry I can't answer your question on the trace, but did you replace the coin type battery at upper left ? I advise replacing it before you do anything else.
-
You will need a 502 or 504 board
-
You've probably got more than one trace eaten up by the battery acid.
There are several that control that Door Circuit.
I also suggest purchasing a new board.
There are a few techs in here that repair those 50X series boards for a price better than a new one.
You can try to post a WTB ad in the Classifieds Section and see who replies.
Mention that you may opt for a repair in lieu of a replacement and see what happens.
Good luck.
Curtis ash100