New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: mwade109 on September 07, 2022, 03:30:16 PM
-
Ok, I am going to part out a E2000 and do not know which chips to remove from the mainboard to sell that by itself as a replacement mainboard.
I want to sell the chips, reel strips and paytable glass as a kit.
I will also be asking this same question soon for a Fortune 1 Video Slot also.
Can anyone tell me which chips to remove?
Thanks!
-mike
-
Anyone?
-
whats the glass look like ?>
-
I have not taken pics yet of the glass as I want to sell the top glass, reel strips and chips as a kit, if anyone would tell me what chips to include with it. Both glasses are good looking, the top glass has two small bad spots where the screw heads have hit it that hold the top light in place. You can just see the right along the top edge of the door, about a inch or so in from each side.
whats the glass look like ?>
-
Ok, so the time has finally come, time to get ride of this main board. Can anyone tell me which chips to take off so I can sell them separately? I'm pretty sure it is the four chips in the picture with the red tape on them but want to make sure.
-
A “kit” would also have to include the index wheels. Chances of selling it are extremely slim.
-
The kit would include the indexed reels and top glass like in the picture and the chips. I don't think this kit would be any harder to sell than the reels by themself as well as the top glass by itself. Actually, I think the kit would sell faster.
-mike
A “kit” would also have to include the index wheels. Chances of selling it are extremely slim.