New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: apinballwiz on November 30, 2022, 08:26:39 PM
-
Hi
I am a newbie to the slot machine world!
I just picked up an IGT 5 cent 5 reel Double Diamond slot machine which I love! I noticed that the 5 cent demonization light on the panel isn't working. There is nothing connected to it. On YouTube videos I saw that there should be a small cable pictured that is missing from my game - can anyone guide me as to where I may find one? Many thanks for any assistance!!!
-
I used to make those micro-touch harnesses a long time ago....those have the smallest pins ever!
I've seen some for sale on ebay every now and then.
Those pins were so tiny, I had to save them in a vial that you get when you buy Exacto knife blades.
I hope someone has one laying around for ya!
Hey!There's one on ebay right now!...>>>
https://www.ebay.com/itm/265978338258?hash=item3ded8b5bd2:g:UkMAAOSwwoZjGQSR&amdata=enc%3AAQAHAAAAoD%2B6LNgfeN6fQk4sSmDTM1z5%2FKb2T6l9mjDSzKR5uxCjVsTo4ZA4oT42iGODFrPdr1jcMCX%2B64UbBTMbDuJ%2FXIlioZJxgadV4iYSWAJwXsyYHXg%2B4FyGDpNrqIh%2FDrTf5qZ2X4jLxuIJzQ0F2edVDBE6aHD5CX1GERJ4NYSckL%2B0Oubq2dsBZcZz3YC3Mz9i1ICkazKX8I4Rm1QTkxxL0%2Bs%3D%7Ctkp%3ABk9SR6rGhcCZYQ (https://www.ebay.com/itm/265978338258?hash=item3ded8b5bd2:g:UkMAAOSwwoZjGQSR&amdata=enc%3AAQAHAAAAoD%2B6LNgfeN6fQk4sSmDTM1z5%2FKb2T6l9mjDSzKR5uxCjVsTo4ZA4oT42iGODFrPdr1jcMCX%2B64UbBTMbDuJ%2FXIlioZJxgadV4iYSWAJwXsyYHXg%2B4FyGDpNrqIh%2FDrTf5qZ2X4jLxuIJzQ0F2edVDBE6aHD5CX1GERJ4NYSckL%2B0Oubq2dsBZcZz3YC3Mz9i1ICkazKX8I4Rm1QTkxxL0%2Bs%3D%7Ctkp%3ABk9SR6rGhcCZYQ)
-
WOW!! Thank you SO much!! Would have never found it on my own.
You are the MAN!!! :hail:
-
You need the short harness. That long one pictured in the ebay listing is going to be in the way when you close the door.
-
I agree...There's two harnesses pictured on the ebay listing....the long and short one.
-
I agree...There's two harnesses pictured on the ebay listing....the long and short one.
Yes, the shorter one pictured is for the touchpad.
-
Oh Oh...I ordered the e-bay part right after reading the post yesterday - does this mean that these cables aren't going to work?
-
Technically, it will work but if you do get the long harness you will need to secure the excess wire out of the way of the reels.
Kristel probably could have sent you the shorter one by request but knowing her great service, it has likely already been shipped.
-
Yes it's been already shipped, but as long as it'll still work I'll find a way to secure the cable. Thanks!
-
I used to make those micro-touch harnesses a long time ago....those have the smallest pins ever!
I've seen some for sale on ebay every now and then.
Those pins were so tiny, I had to save them in a vial that you get when you buy Exacto knife blades.
I hope someone has one laying around for ya!
Hey!There's one on ebay right now!...>>>
Just wanted to let you know the part came today, and the small cable fits and works great! Thank you again for helping me track it down.
Out of curiosity do you know where the longer cable connects to the machine?
-
It's for a short glass display. See reply #3, third picture.
-
Yes, my bad. Thank you :yes:
-
Okay...the leds now light up with the small cable installed, but the touchpad doesn't work. Looking at the pic at the top of this topic am I missing another cable?
-
Didn't you buy the one listed on feebay? It shows both harnesses. The six pin goes to the touchpad.
-
Didn't you buy the one listed on feebay? It shows both harnesses. The six pin goes to the touchpad.
Feebay...love it! :yes:
I have the cable (duh) thank you. I assume the touchpad is in the box, how does the box come out so I can plug it in? I don't see any hardware holding it in, I tried wiggling and pulling it out gently but seems to be in there pretty good. I'm sorry for the noob question...
-
Remove the screws form the display panel. You may or may not have a touchpad in between the box and the glass. It will be gold colored with a matching 6 pin connector on the back.
-
Remove the screws form the display panel. You may or may not have a touchpad in between the box and the glass. It will be gold colored with a matching 6 pin connector on the back.
Thank you for this info and all of your assistance - it's very appreciated! :hail: