New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Phan000 on November 05, 2023, 05:12:38 AM
-
Greetings,
I have a 19” cabinet with a crt monitor.
Does not have fans, but seems to need them. The board sometimes crashes when left on for a long time. I suspect it’s overheating.
There is no mounting hardware, just one bolt coming out near the vent.
The shelf in-between the bottom and top cab has no hole for a horizontal fan mount.
How is a fan supposed to be installed?
Thanks!
-
There should be a fan to the right rear of the mpu housing. This one is important to keep the mpu from overheating. Also, there is usually a fan above the monitor section that expels the heat into the top box. There is usually another in the top box that expels heat to outside.
-
Thanks for the response.
If anyone has a 19” cabinet, I’d love some photos of the brackets and mounting for the fans.
-
Can you please post a picture of your cabinet. Just to clarify, does it have a 19" monitor ?
On some 17" cabinets that have a fan on the left side rear top of the monitor section, the fan mount slid into tabs on the cabinet and over a stud. I will see if I can get to one of these.
Thanks,
Wayne
-
This machine has a 19” crt.
There is a bolt for a fan in the top of the round top & next to the vent behind the monitor.
Pardon the dust :)
-
Ok, not the cabinet I was thinking. I don't have that type here, so can't post photos. I will post the ones I took this morning from a different cabinet, just for the mpu fan and cabinet fan ideas. Nice machine . Hopefully someone with that cabinet can jump in.
Thanks,
Wayne
P.s. i screenshot my pictures to reduce size quickly.