New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Robert Delfin on December 19, 2023, 10:14:31 AM

Title: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: Robert Delfin on December 19, 2023, 10:14:31 AM

Hello,

I have recently acquired a slot machine. But I am having trouble identifying it. The person purchased from was not that great with remembering things and forgot information regarding what the machine was. Due to this I am unable to figure out what type of lights I need to get to replace the part since the buttons on the front are starting to go out. Not sure what type of IGT game king machine it is. Neither do I know where to buy the parts from since I heard a lot of place scam people.
 
I attached the a pictures of the front of the machine, door, inside of the machine. I also took another picture but was not sure what the mother board was and took a picture of something that was labeled model. I am new to machines such as these so I have no idea what parts it is made of. The light I am looking to replace currently is the one found inside the door on the left green strip a picture of the light bulb is attached

Thank you,

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: sixcardmark on December 19, 2023, 10:41:16 AM

That is a 17" chop top 3902 game king.  Bulbs are 12v T10s behind the yellow arrow (green strip).

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: a69mopar on December 19, 2023, 11:22:12 AM

The picture named "possible motherboard" is the chassis i/o card.

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: a69mopar on December 19, 2023, 11:26:49 AM

Your mpu board is in this picture circled

Thanks,
Wayne

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: a69mopar on December 19, 2023, 11:38:46 AM

You may be able to see the number on those bulbs. They are number 658 wedge bulbs, but many people like to replace with led bulbs.  The small button bulbs are number 73 mini wedge bulbs.

Once you make a few more posts, or replies in this post, you will be able to post a wanted to buy ad in the classifieds section for anything you may need. There are many reputable sellers, it's too bad that there are scammers out there. .

W

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: Robert Delfin on December 19, 2023, 05:28:04 PM

Thank you everyone for replying,

So the bulbs I am looking for are 658 wedge bulbs and the 73 mini wedge bulbs. If I were to switch to LED what would I look for like 12 volt ones? Like the “12 V T10s” mentioned earlier.

Also the black bottom of the wedge bulbs the ones that seem to twist into the slots. What would those be called.

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: sixcardmark on December 19, 2023, 05:35:02 PM

12V T10 LED bulbs: https://www.spininc.com/lamp-led-lamp-t10-12-volt-led-igt-s2000 (https://www.spininc.com/lamp-led-lamp-t10-12-volt-led-igt-s2000)

Game king button LED bulbs: https://www.spininc.com/led-t5-12-vdc-mini-wedge-igt-button (https://www.spininc.com/led-t5-12-vdc-mini-wedge-igt-button)

Title: Re: Machine Identification & Replacement Parts Help Needed (New to Owning One)
Post by: a69mopar on December 19, 2023, 06:55:11 PM

Just search for t10 bulb twist socket, you will see on Amazon and many other places.