New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Chesley on December 25, 2023, 01:08:30 PM
-
Can anyone tell me which clear and key chips I need for this Game King (or the Triple Red Hot 7s in the other picture)?
-
The Game King MPU already has the key/clear built in with the 039 bootchip. To access the menu push and hold the mpu self test button and turn the machine power on. A menu will appear on the screen.
The S2000 MPU Key 45/ICV224 Clear.
Member RB can probably help you with the S2000 if you need a set.
-
Did I miss something?
After following the instructions to turn with :Scratch-Head:on the the test switch pushed in I get a blank screen. Restarting different ways - same thing
-
That red led on MPU should not be lit.
-
The machine was working prior to this, but only cash. The TITO would not recognise vouchers.
-
Did you remove the MPU? With machine off check for a bent pin on MPU connector to backplane.
-
All good, but with the MPU out I was able to slightly push in further a connector on the back plane. It was that or pushing the MPU back in more firmly has brought me back to where I was. TITO will still not accept vouchers. But thank you for getting my screen back!
-
The Game King MPU already has the key/clear built in with the 039 bootchip. To access the menu push and hold the mpu self test button and turn the machine power on. A menu will appear on the screen.
Back to clearing with the initial instructions: Do I need to remove the game chip before I do this? It didn't work the first time.
-
It doesn't have a game chip. It only has the boot chip. Be sure it is properly installed with no broken or bent pins. Check the MPU and flash board as well for the same and be sure the power supply is securely installed.
-
And you don't need to clear anything. Just select the NON WAP from the keychips menu and apply. Then you can set SAS/Comm options for the TITO board.
-
Thank you all for your help. Up and running and accepting tickets!