| **Video Poker, Keno, Slots, 21** Gaming machines > Aristocrat Video Gaming Machines |
| Aristocrat MK-6 no lockups. BV Cycles but Red lights- SOLVED |
| (1/2) > >> |
| slotmachineparts:
All games came from a casino. Were on the floor. Only 6 months old. The casino bought them refurbished from Aristocrat. Was able to clear the errors, however now I can't get the machine to accept bills. I have no current lockups. I have switched bill validators a couple times still no success. The BV do cycle, however, just show up with red lights. JCM UBA 10 V2.07-25 Set Chips Used: 06.03.20-U3 Series 01 M27v800 MK6USA 13D163A0 & 06.03.20-U2 SERIES 01 M27v800 MK6USA 3CF90UD9 SYSTEM BASE: 01.04.16-u70 SERIES 01 M27V160 E804C710 & 01.04.16-U83 SERIES 01 M27V160 MK6USA 4A13D11B |
| BettorSlots:
Take a look in the top box and see if the player tracking board is still plugged in. Just disconnect any of the harnesses that are plugged into it. After that do a clear and set it up again. I had the same issue on a couple that I shopped and that fixed the problem. |
| slotmachineparts:
I appreciate the response. I just tried that. Have the same issue. BV Light is still RED. |
| BettorSlots:
Check comm wires leading from BV hub to back plane for damage. Is this a known working BV...do you have another one to try? |
| slotmachineparts:
Everything looks good. BV Cycles, did test in bv and accepts bill. Can not test in diagnostic, however. |
| Navigation |
| Message Index |
| Next page |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |