| Bill Validators, Currency Acceptors and Printers > MEI Mars Bill Validators |
| mei to s2000 |
| (1/1) |
| buybestslots:
have a mars we pulled from a junk s2000 along time ago, we put it in another s2000 but can't get it to go to green light any hints ? do those 3 wires with just lugs go any where? thanks steve |
| rickhunter:
I just installed a mars into an I-game. I only plugged the 3 black molex connectors 5, 4 and 2 pins. The 3 wires, I just left hanging. Are the 3 lights on when you power up? When the game is not configured for a validator, the 3 lights just stay on. Then when the game detects the validator, the green light starts blinking. When it is ready to accept, the green light is lit. What does your validator do? |
| buybestslots:
I get 3 lights at 1st and it cycles but then goes to yellow light only I'll try unhooking the front dbv bezel, maybe a mars aren't for that type with all those light |
| idylewild1:
I would think you would may have to do a netplex configure. |
| buybestslots:
I tried that , going to try another cash box also ,pulled out a uba out of this game hate to give a uba up when we have wba,s and a few mars laying around was cash can replaced and everything is good |
| Navigation |
| Message Index |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |