New Life Games LLC
**Reel Slots** Gaming Machines => Universal Reel/Video Games => Topic started by: Jackpot on July 12, 2018, 08:22:08 PM
-
Any ideas: Universal reel slot coins up and handle works great on play but: it doesn't return, it locks down every time and I have to wiggle it a few times and then it will release and return to upright. Any ideas of what could be causing this, do I need to pull the handle mechanism to fix what is wrong?
Thanks for you ideas!
Jackpot
:thank_you:
-
I'm no expert on Universals, but I would think pulling and cleaning would do the trick. Seems to be acting like something's getting stuck and needs cleaned
-
I found the problem and was able to fix it without removing the handle. It was the ratchet that interacts with that long bar in front, the center ratchet rides on a shaft, the shaft or axle and the ratchet did not move independently, so I had to clean and sand the shaft and slid the ratchet back on, that did it. It was fine when I got it, and then I put it out in the cold garage and the grease got stiff, that is how I find problems in slot machines, by putting them in a cold area for a day or two, but this one stumped me.
Thanks
Jackpot
-
I found the problem and was able to fix it without removing the handle. It was the ratchet that interacts with that long bar in front, the center ratchet rides on a shaft, the shaft or axle and the ratchet did not move independently, so I had to clean and sand the shaft and slid the ratchet back on, that did it. It was fine when I got it, and then I put it out in the cold garage and the grease got stiff, that is how I find problems in slot machines, by putting them in a cold area for a day or two, but this one stumped me.
Thanks
Jackpot
Thank You! My handle has been stuck forward for a few years now (got lazy in the hobby)....Just worked that catch back and forth, fixed!