New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Sigma 50-B jumper switches help for changing payout percentages  (Read 1884 times)

0 Members and 1 Guest are viewing this topic.

Offline Flappa

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 83
  • Reputation Power: 7
  • Flappa New User has no influence.
  • Gender: Male
  • NLG
I have a Sigma 50-B Double Cherries, one line slot machine. I would like to change the payout percentage to the highest percentage of 98%. I have the manual and it says to use the Jumper switches to do that, but there are 10 jumper switches and the manual only refers to 1,2 and 4. If anyone knows how to help me find out what to do with the 10 jumper switches for this, could you please reach out? TIA

Offline PyroJim

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 5
  • Reputation Power: 0
  • PyroJim New User has no influence.
  • NLG
Re: Sigma 50-B jumper switches help for changing payout percentages
« Reply #1 on: April 23, 2024, 09:50:22 AM »
I have a similar machine and the only manual I can find also refers to jumper switches.  However, on the CPU board right next to the 8-position switch is a series of wires all lined up in a row.  In order to change the percentage, you need to open (disconnect) or close (connect) the wires.  I'm fairly new at this, but my thought it that the wires were put in place to make it a little harder to set the percentages.  Otherwise, anyone could easily and intentionally (or accidentally) reset the percentages in just a second.  The wires are still really simple to deak with:  It's just a matter of soldering or unsoldering a wire to make or break the connection, but it requires a soldering iron and the true intention of changing the %, as opposed to just sliding a switch.  Anyhow, that's how my machine is built.  If you upload a phot of your cpu board, we can confirm.


Good luck! 

Offline Flappa

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 83
  • Reputation Power: 7
  • Flappa New User has no influence.
  • Gender: Male
  • NLG
Re: Sigma 50-B jumper switches help for changing payout percentages
« Reply #2 on: April 23, 2024, 10:04:18 AM »
Thanks for the reply. On my board, the jumper switches are on the back side so that they cannot be changed quickly or easily. There are 10 switch positions, but the manual only mentions 6 and only 4 positions for payout percentages. And it just doesn't make any sense to me. Here are photos of the front of my board and the back of my board with the jumper switches and also a page from the manual that poorly describes what to do to change percentages.

Offline PyroJim

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 5
  • Reputation Power: 0
  • PyroJim New User has no influence.
  • NLG
Re: Sigma 50-B jumper switches help for changing payout percentages
« Reply #3 on: April 23, 2024, 11:11:21 AM »
Ok, that doesn't look so bad.  If I'm looking at it correctly, you have a 20 Pin DIP (dual inline package) socket with soldered wire bridges.  This gives you 10 possible jumpers, of which it's likely that only the first 8 are being used.  I can't see in the blurry photo but my guess is that jumper#1 is on the left.  You can Google how to find pin 1 on a 20 Pin DIP to be sure. It usually has a small mark to identify #1.   If I'm correct, it is currently configured with 1, 3,4,5, 7, and 8 closed/jumped.  Unfortunately, that does not agree with any of the % settings on the chart.  According to the chart, the % is set using jumpers # 1, 2, and 4, and I do not see a combination that matches what you currently have. To get 98%, you want jumpers on 1, 2, and 4. Right now, of the 3, you only have #1 and #4 jumpered and I don't see that combination in the chart, so I've got no idea what it's currently doing.  My guess is that you can add a jumper to #2 and you "should" be at 98%.

The chart does not say what all the other jumpers do, so I would not mess with them yet.  Try just adding a jumper to #2 and see if it loosens up.

By the way, before you solder anything, remove the DIP header from the socket so that you are not working directly on the board itself.  Use a good quality pencil iron, not one of those pistol grip high heat nuclear things that melt everything.

Good luck.  Post more pictures when you can.

Offline Flappa

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 83
  • Reputation Power: 7
  • Flappa New User has no influence.
  • Gender: Male
  • NLG
Re: Sigma 50-B jumper switches help for changing payout percentages
« Reply #4 on: April 23, 2024, 11:55:43 AM »
Yes, I can see on the other side of the board that number 1 is on the left as we see it from the back side of the board. I thought the same as you, that I just needed to jump number 1 number 2 and number 4 to get the 98% payout, but if you look at that payout chart, there are 7 other percentages that also have 1, 2 and 4 on. 83% payout has the same jumpers on. That's why I don't know what it's trying to tell me in that chart, very confusing.

Offline PyroJim

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 5
  • Reputation Power: 0
  • PyroJim New User has no influence.
  • NLG
Re: Sigma 50-B jumper switches help for changing payout percentages
« Reply #5 on: April 23, 2024, 02:02:51 PM »
I see what you mean, I hadn't noticed that. 

83%, 84%, 85%, and 93% all have the same switch settings. As do several others.   That makes no sense.

Can you check the rest of the manual, especially the appandix, and see if there is anything written about the switches other than 1, 2 and 4?   I'm curious what #3, #7 and #8 does.

Sometimes user manuals loose something in translation to english.  Can you share a copy? 

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal