New Life Games LLC
**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: Chuck spurlock on October 16, 2021, 01:31:30 PM
-
Hi all,
i have a wms bluebird 5 reel stepper cabinet can anyone explain to me what clear and setup key needed for this machine, and how to do it so i can activate the printer, also do these machines always take 10 minutes to start up? the reels jump just a bit while it's going through the startup mode and after about 10 minutes it fires up and runs awesome.
Chuck
-
Clear depends on your bios version. You can view the setup in you tube, the setup is the same for steppers and video, just the monitors are a lot smaller for your machine, but the menus are the same. Here's Bettorslots' video on the setup procedure with printer.
https://www.youtube.com/watch?v=5frTkXd75GQ (https://www.youtube.com/watch?v=5frTkXd75GQ)
And yes, they alway take that long to boot up, I have some games that take more than 20 minutes to start up.
-
thank you my brother, i will check it out
thanks Rick
-
hey all, dumb question: i have a bb stepper do you have to ram clear and re setup to enable your printer?
-
Yes, but you also need a TITO board if you want your machine to take the tickets back to issue credits, otherwise, the printed tickets are not usable for anything other than eye candy.
-
yes i do know that, i plan on a bettor, anyway my problem is when i put the clear key in it gets to a certain point and just sits, the last thing it was trying to do is mount the root, it says kernel panic;unable to mount the root
-
done, thanks