**Video Poker, Keno, Slots, 21** Gaming machines > Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc.
Bally A2 Curve - Can't Get Code Red on Curve Display
marcbollinger:
Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.
sixcardmark:
--- Quote from: marcbollinger on April 19, 2024, 01:38:04 PM ---Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.
--- End quote ---
Can't do that - DVI has to be primary TOP screen. Run top to DVI, curve to DP. Curve screen is not primary, Top screen is primary on a curve machine, bottom screen is primary on all other setups. The reason top is primary on curve is because you can't program machine on the curve monitor.
marcbollinger:
--- Quote from: sixcardmark on April 19, 2024, 02:07:14 PM ---
--- Quote from: marcbollinger on April 19, 2024, 01:38:04 PM ---Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.
--- End quote ---
Can't do that - DVI has to be primary TOP screen. Run top to DVI, curve to DP. Curve screen is not primary, Top screen is primary on a curve machine, bottom screen is primary on all other setups. The reason top is primary on curve is because you can't program machine on the curve monitor.
--- End quote ---
Gotcha, I'll give it a shot.
coolwavepic:
Marc keep us posted. Mark is correct. Its weird that Code Red is the only one giving you problems. It was the first game to be released on the curve so maybe its more picky on how you need to connect the monitor.
My card (from left to right)
[DP] [DP] [DVI]
DVI runs to the top monitor
Middle DP is connected to adapter to connect to Curve Monitor with adapter.
I'm sure you know this, but you also have to swap touch screen cables when swapping from 22/22 to curve.
If this still is an issue, try factory restoring. Reload OS, game, etc. Sometimes other games leave files on the HDD that conflict with other games. Usually its a red box error but you never know. Just a good trouble shooting tip.
marcbollinger:
Bingo! Mark was correct.
Directly connecting DVI to top monitor and leaving DP to curve solved the problem.
Thanks so much guys! Appreciate the help.
Marc
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |