New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: slotmachineparts on March 12, 2014, 08:33:40 PM
-
All games came from a casino. Were on the floor. Only 6 months old. The casino bought them refurbished from Aristocrat.
Was able to clear the errors, however now I can't get the machine to accept bills. I have no current lockups. I have switched bill validators a couple times still no success. The BV do cycle, however, just show up with red lights.
JCM UBA 10 V2.07-25
Set Chips Used:
06.03.20-U3 Series 01 M27v800 MK6USA 13D163A0
&
06.03.20-U2 SERIES 01 M27v800 MK6USA 3CF90UD9
SYSTEM BASE:
01.04.16-u70 SERIES 01 M27V160 E804C710
&
01.04.16-U83 SERIES 01 M27V160 MK6USA 4A13D11B
-
Take a look in the top box and see if the player tracking board is still plugged in. Just disconnect any of the harnesses that are plugged into it. After that do a clear and set it up again. I had the same issue on a couple that I shopped and that fixed the problem.
-
I appreciate the response. I just tried that. Have the same issue. BV Light is still RED.
-
Check comm wires leading from BV hub to back plane for damage. Is this a known working BV...do you have another one to try?
-
Everything looks good. BV Cycles, did test in bv and accepts bill. Can not test in diagnostic, however.
-
Everything was alright. ICB was enabled on the cash box. Went in and removed the ICB module from JCM UBA Cashbox.
Thanks BettorSlots and HARP.
John
-
got mk6 has lockup from open cash box has a wba in it box is closed what are we missing?
-
Hi this topic says solved... can you let me know what the solution was ?
Thanks
Al