**Video Poker, Keno, Slots, 21** Gaming machines > BALLY Game Maker

Gamemaker Drop Door Error

(1/1)

Tacman:
Hello all, I have a gamemaker that says the drop door is open (upright), wich does not have a drop door...anyone run into this problem and if so what is the fix?  Thanks, mike @ The Pinball Shoppe
 
 
rslots

   Re: Gamemaker drop door open??
« Reply #1 on: January 03, 2006, 08:15:07 PM »

--------------------------------------------------------------------------------
Bally's uses the term "drop door" to refer to the door on the side of the machine where you access the cash box.  You will get this error from one of two switches (or both).  One switch senses that a cash can is in place (you can see it inside the cash box cavity) and the other switch senses that the door is closed and locked (this switch is above the cash box cavity and is activated by the cam on the cash door lock.  So if you have a cash can installed and the door is locked with the proper cam (1 1/2"" straight cam), the problem should go away.
 
 
 
pinshoppe@aol.com

   Re: Gamemaker drop door open??
« Reply #2 on: January 04, 2006, 08:30:19 AM »

--------------------------------------------------------------------------------
Actually, it is not the door you are referring to...unfortunately.  The Bill door and the stacker door are both working properly.  It shows the picture of the drop door open on the screen and puts it at the bottom of the upright gamemaker.  What we did was swap mpu boards with a customer who was having a problem with his machine. The machine I am speaking of was working perfectly before doing this. Does anyone know a difference in boards that may change the settings from a slant top to an upright or vice versa?  I do not have a listing of the dip switches either.  Thanks, Mike
 
 
rslots

   Re: Gamemaker drop door open??
« Reply #3 on: January 05, 2006, 09:32:48 PM »

--------------------------------------------------------------------------------
I have only worked on either upright or flat top (bar top) Gamemakers but I know you can configure the machine for either upright or slant top cabinet as part of the set up.  It is one of the on-screen set-up options which you must choose.  You might try changing the set-up.  I don't believe there is any difference in the boards or the dip switches but only in the machine options that you select to tell the processor that the cabinet is either an upright or a slant top.    The slant top has en extra switch for the lower deck.  It may be interpreted as an open drop door.
 
 
hotslot101

   Re: Gamemaker drop door open??
« Reply #4 on: January 05, 2006, 09:46:16 PM »

--------------------------------------------------------------------------------
Also check the mother pcb at the socket/plug marked Cabinet I/O

If you have two wires comming from pin 13   GR/WT   &   pin 14  WT/BK then the machine has its internal drop switch harness, you need to loop these wires, or the switch is tucked away in the cabinet somewhere and just needs put into close position.

cheers
Ozzy

Tacman:
I've got a belly Game Maker 7200 and I get the Dropbox open door error.the game won't play at all I pull out the cash box open the door I don't get any other lights on the machine that says the cash doors open.I tried the one fix that says ground out pin 11 on u16 and it doesn't make any difference. does anybody have a clue what I should try next?The machine I have and  I've not been able to get it to go the Dropbox door open is keeping it from playing.opening the cash box door does not seem to make a difference as far as the graphics go.the switche's on the cash box test fine but I'm wondering since the cash box graphics ?aren't coming up on the screen is the fault in the cash box since there is no Dropbox to deal with. I really appreciate any help you guys can give me.
« Reply #7 on: 03-10-2013, 17:22:44 »
First thing I do when I get a gamemaker upright is reach in and pull out the harness to drop door,  isolate orange wire, connect gray and yellow wire together.  -that problem never happens again.
If you are using a DBV 145/200 validator, check the wire connections to the small board on the side under the bill validator make sure the plugs are straight in,  they can be accidentally be moved over by 1azslots

Navigation

[0] Message Index