New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: Phan000 on June 15, 2021, 10:58:10 AM

Title: My first BB1, getting close but hardware issues
Post by: Phan000 on June 15, 2021, 10:58:10 AM

Got my new bb1 booted up, but have BV, and printer issues.

With JCM bv-  I bought a new transport and bill head from spin.  Should be flashed correctly.

Existing Stacker housing  is missing back cherry switch and wiring seems to be missing.  Where would the wire harness for this switch be located on backplane? 

With printer-  bought a future logic gen 2.  Paper does not pull in, printer rejects.  Printer may be bad.  As far as settings, the only netplex setting has another name before it.  Is this still the correct setting?  Is this the correct printer?


(https://i.imgur.com/nFpghg8.jpg)
This machine is for my wife and I am very anxious to get it running. Thanks for any help!

Title: Re: Initial set up bb1 chop top with input/output error
Post by: Phan000 on June 17, 2021, 04:42:53 AM

Double post.  Sorry