Bill Validators, Currency Acceptors and Printers > JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators |
*START HERE* FOR TROUBLESHOOTING YOUR WBA |
(1/1) |
shortrackskater:
From Jim, supporting vendor of Midwest Slots (1-513-984-2201) Thank you Jim!!! Test the Bill unit using the stand alone test mode, takes the uncertainly out of troubleshooting! Remove the cash can. All dip switches should be in the up position before you start. Now, flip 1-2-3 and 8 down, install the bill unit in the machine, turn power on to the machine. Now, flip #8 up, (while the unit is in place) the unit should briefly cycle. Now you can insert bills into the unit. IF THE UNIT IS WORKING, IT WILL PULL THE BILL INTO THE UNIT AND DEPOSIT IT WHERE THE CASH CAN SHOULD BE. You should be able to test any bill in the unit, this can also be used to determine what bills the unit will accept. |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |