New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: rjpohl on February 23, 2017, 01:51:32 PM

Title: keeps going back to 61 code
Post by: rjpohl on February 23, 2017, 01:51:32 PM

Had a 12 code so I changed the battery and put board  back in, got the 61 code, pressed test button, ding and 61-1 code, closed door and turned reset key, the 61-1 goes out and a '0" flashes in winner paid window, then 61 comes back.  I can press the test button and the 61 goes off but comes back on in a few seconds.  I put a known good board in and got the same exact results.  I then tried to do a clear but it doesn't seem to recognize the chip (I tried 2 different clear chips).


anyone had this problem?


thanks
Bob

Title: Re: keeps going back to 61 code
Post by: Jim on February 23, 2017, 02:05:38 PM

Bob,  you could have a bad mother board, the e squared chip could be bad.   its the 8 pin chip, the only one on the board.


Jim

Title: Re: keeps going back to 61 code
Post by: slots4home on February 23, 2017, 02:07:26 PM

Bob,
Their is a small chip on the motherboard that goes bad and it will not allow you to get past the 61-1 code
It sounds like you have done it right and also that the 61-1 goes away and comes back tells me that the optics are working.
I hope I am wrong with this one

Title: Re: keeps going back to 61 code
Post by: rjpohl on February 23, 2017, 02:14:52 PM

I pulled the motherboard and was thinking about changing it.  It will be a few days before I can get back to it.
thanks
Bob

Title: Re: keeps going back to 61 code
Post by: rjpohl on February 23, 2017, 02:28:35 PM

where can I purchase the 24c04 chips?
thanks