New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Brewchap on March 03, 2024, 02:27:59 PM
-
I have an S2000 for a 3 reel game. I bought this machine not working. I can now play the slot machine, but there are times when all 3 reels coils lock on. I'm not sure if I need to adjust the reels or look at the I/O board for bad transistor.
Edit. machine is an E2000
-
There's a few things uh...misnamed or misunderstood.
I will try my best to help you.
"I have an S2000 for a 3 reel game. "
An S2000 was a line of slot machines made by a slot company called IGT.
You've placed this Topic in the Bally section of NLG.
Hopefully a moderator will move it to the S2000 area.
"there are times when all 3 reels coils lock on."
These are called stepper reels.
The reels are supposed to "hold" in position after every completed game or spin.
They will turn when another game is played.
"I'm not sure if I need to adjust the reels"
Stepper reel motors cannot be "adjusted".
If the symbols are "off", the reel strips can be removed to verify if the notch is seated into the nibs on the reel baskets correctly.
"the I/O board "
I'm not quite sure what YOU mean by an I/O board but I can tell you that normally I/O cards in an S2000 are located in possibly three places.
Sometimes, there is one mounted on against the MPU enclosure.
It is used I believe with an additional harness when there's a backlight reel driver board
There would be an I/O card mounted on the back door panel, and that would be for communication for main row of buttons on the button deck.
When a machine is equipped with two rows of buttons, there would be an additional I/O card supporting communication for those extra deck buttons.
I hope this helps you?
-
Yeah, I still need to work on my terminology. What I'm experiencing at boot up or a reset, I try to start a game, the reel coils lock on and buzz and you can not start a game.
This is a Bally game, maybe S2000 is the wrong version. How do I find what system I got?
-
How do I find what system I got?
Post a picture of the machine. :yes:
-
I feel pretty stupid right now. I woke up this morning and remembered that this is an E2000 machine. No idea where my head was.
-
How do you reset the machine when the machine tilts or acts up like when the coils lock on? Is there a PDF file that describes what to do and when to use the key on the side of the machine?
-
Thank You for your assistance and patience bunker. :applause: