New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: RONR11 on May 12, 2017, 03:33:48 PM

Title: Igt s+ setup issue
Post by: RONR11 on May 12, 2017, 03:33:48 PM
just did a clear on a s+ and settings say to push test button 3 times and it will go to 5 in the window, however mine goes to a 10.  1 in the win window and 3 in the coin window. Anybody have this problem before?  Thanks Ron
Title: Re: Igt s+ setup issue
Post by: Shaggy on May 12, 2017, 04:05:26 PM
Are you using the correct PSR for your SPchip? Some of them setup a little different depending on the game and type of game chip you're using.

Dave
Title: Re: Igt s+ setup issue
Post by: RONR11 on May 12, 2017, 04:24:35 PM
You were right Dave,  thanks for reply it did have a different chip and I was following the other setup. This is
A Louisiana Louie and not sure how the reels stop. Sometimes they seem to stop in between. Thanks again for your help.  Ron



 
Title: Re: Igt s+ setup issue
Post by: RONR11 on May 13, 2017, 07:07:20 AM
New problem now. When I get a win. It goes to credit window along with all zeros and the chimes keep chiming?  Was ok till t
I replaced the bulb in the cash out button.  Thanks Ron
Title: Re: Igt s+ setup issue
Post by: Ken on May 13, 2017, 07:27:39 AM
Sounds like the hopper limit needs to be increased in section 7 of the setup.
Title: Re: Igt s+ setup issue
Post by: RONR11 on May 13, 2017, 08:18:15 AM
Thanks for reply Ken,  I have the hopper set to 0000 and if I read correctly that should take wins to credits.  I just rechecked my settings to b sure.
Title: Re: Igt s+ setup issue
Post by: Ken on May 13, 2017, 02:09:15 PM
all zeros causes the problem you are having.

Set it to 1000.
Title: Re: Igt s+ setup issue
Post by: RONR11 on May 15, 2017, 03:51:34 PM
I want to thank all replies and did find the problem. Ken mentioned on a old post about some cash out buttons   wired differently on this chip so I set my 5-0 settings to 5-2 and it worked.  I thought I had installed them back on the button right but I changed wires and I'm up and running.



SimplePortal 2.3.5 © 2008-2012, SimplePortal