**Video Poker, Keno, Slots, 21** Gaming machines > Bally EVO and EVO hybrid.

moved evo cabinet now monitor doesn't power on

(1/3) > >>

john398:
I am assuming this maybe a grounding issue but I am not sure

My EVO unit was laying on its back for about 6 months while I worked on it, I finally got it working so had a friend move it into the how and in the upright position, I did remove the suitcase before the move

Now with suitcase reinserted monitor does not power up at all, I am getting a video signal as I have hooked up to a different monitor as a test, of course that monitor does not have touchscreen so cannot use it I do not think

Anyway can someone point me to a link or tell me what to troubleshoot first

Thanks

shortrackskater:
I'm confused (as usual) - so the machine appears to have no power at all with the correct monitor but, with a replacement monitor there IS power?
If you have a CRT (I assume), carefully check the internal plugs (like the one to the picture tube itself) but watch out as it may have some  :lightningbolt: :lightningbolt: in it. So, you may want to discharge the CRT first if you know how.
Report back.

john398:

--- Quote from: shortrackskater on October 06, 2016, 08:57:16 AM ---I'm confused (as usual) - so the machine appears to have no power at all with the correct monitor but, with a replacement monitor there IS power?
If you have a CRT (I assume), carefully check the internal plugs (like the one to the picture tube itself) but watch out as it may have some  :lightningbolt: :lightningbolt: in it. So, you may want to discharge the CRT first if you know how.
Report back.

--- End quote ---
D

sorry to confuse you, theres no display to the monitor the video out to an external monitor that I use for my computer it gets a display so I know video out is working on the suitcase
'yes its a CRT I will check internal plugs.

maybe see where the main power is for the internal monitor

john398:
I took screws off the CRT and noticed the led thats by the horizontal vertical controls does not light, should this be lit above the CRT when the slot unit is on?

shortrackskater:
It sounds like you might not be getting power to the CRT.  When you power up, is there any static on the screen that you can feel?

Navigation

[0] Message Index

[#] Next page