New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: brianfink on March 30, 2016, 07:18:36 AM
-
Machine was working fine for awhile then got a touchscreen device error. Rebooted machine and got this other error (see picture). Rebooted again and now monitor goes into rest mode and I get no video at all. All lights and fans on motherboard and CPU are on but nothing is happening at all.
-
Have you tried re-seating the mpu?
-
If you are getting no video at all now, it is indicative of the MPU, make sure the adastra board is not loose inside the mpu, I would push on the left and right side of the adastra board to make sure it is in there correctly. If you have another MPU, I would try that as well. The error on the screen says that the validation failed for your game CF, but that may be a false positive if you have some memory issue going on.
-
Thanks for the advice, I have another machine I can swap parts with, unfortunately not at the same location. I guess I'll take the board and power supply just in case.