New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Thompy on January 25, 2021, 05:18:36 AM
-
Hi all,
I have some series e machines that use the mpu 2000, and I'm pulling my hair out!
Basically when cold the machines on the first coin in give me a 41 1 tilt, in the test 5 the reels are read correctly, but when reset the machines both give that error, I have swoped from a working game the mpu, reel readers I/O board and it is always the same, have also swoped the power supply.
In the working game I have the parts from the machines that are giving this error are all ok and run fine.
If you leave the machines on for say a good few hours after a reset the games will play with no problems.
Any help is much appreciated!