New Life Games LLC

**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Stingerrray on May 21, 2022, 09:05:13 PM

Title: Bally S6000 Still not working. Sent to KLAR board tested???
Post by: Stingerrray on May 21, 2022, 09:05:13 PM

Have a Bally S6000 Bonus Frenzy. Sent the MPU and Power Supply to Klar. The chips were replaced by Alan and MPU tested to be good as well as the PSU. When I got the tested MPU I reinstalled and still the same. No Boot up voice and no LCD display at all. The MPU blinks steadily and very dim. Any Ideas. Again Alan tested the board and PSU to be working.

Regards,
Rob

Title: Re: Bally S6000 Still not working. Sent to KLAR board tested???
Post by: Sunrise Side on May 22, 2022, 06:38:33 AM

Be sure the MPU is fully seated as they are very tight fighting. You can feel it pop into place.

Title: Re: Bally S6000 Still not working. Sent to KLAR board tested???
Post by: Sunrise Side on May 22, 2022, 06:39:57 AM

Can you post a few pictures of inside of machine and of outside with power turned on?

Title: Re: Bally S6000 Still not working. Sent to KLAR board tested???
Post by: Stingerrray on May 25, 2022, 10:11:09 PM

Thanks for your help, I will post pictures tomorrow.

Regards,
Rob