New Life Games LLC

**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: PatrickLewis.net on August 28, 2023, 07:54:46 PM

Title: Source for resitors 890H
Post by: PatrickLewis.net on August 28, 2023, 07:54:46 PM

Is there a good source for these resistors (i believe) on the reel assembly?

Title: Re: Source for resitors 890H
Post by: David Walz on August 28, 2023, 08:22:28 PM

https://www.justradios.com/ (https://www.justradios.com/)


If that's a wire wound resistor it should be good. The capacitor is probably dead. You need the exact size capacitor or: :burningresistor: On all of my old radios I replace all of the capacitors and the resistors are left alone.

Title: Re: Source for resitors 890H
Post by: wolftalk on August 29, 2023, 07:54:34 PM

890H?   Bally model 890 was a pinball machine called Four Queens.

in any case, the 470 ohm 10 watt resistor can be found on amazon, aliexpress, ebay, or electronics supply places like mouser, digikey, jameco, anchor surplus, etc.  Shipping should cost more than the parts.

the electrolytic capacitor is probably 30uF 250V, but we should confirm the model of the game as see if it's the one on the delay relay.