New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: RayV on November 22, 2023, 12:24:19 PM
-
So last night I opened up one of my S+ machines to empty the coin hopper.
Closed it up and turned it on via the power strip and heard a slight pop and nothing shows on any of the displays.
Opened the door to see if I could see anything and after looking for a while, I noticed a black wire had come out of the coin comparitor plug and was touching metal.
I looked at another one of my S+ coin mech to see where the black wire went on the plug and put it back and fired it up again, but still nothing on any display.
MPU fried?
-
You may have just blown a fuse. Remove the coin tray and check the 3 fuses on the front of the power box.
-
You may have just blown a fuse. Remove the coin tray and check the 3 fuses on the front of the power box.
Ok I’ll check them.
Thanks
-
You may have just blown a fuse. Remove the coin tray and check the 3 fuses on the front of the power box.
All 3 fuses are good.
-
Is there any signs of power? Some power strips have reset buttons on them.