New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: BrianM on April 22, 2017, 12:52:30 PM

Title: WMS BB1 Setup System halted error
Post by: BrianM on April 22, 2017, 12:52:30 PM

Any thoughts on this error.  Do I need a new OS. Card?

Title: Re: WMS BB1 Setup System halted error
Post by: Yoeddy1 on April 22, 2017, 01:03:29 PM

What game and OS are you trying to load?


Version numbers would be helpful.


Jason

Title: Re: WMS BB1 Setup System halted error
Post by: coolwavepic on April 22, 2017, 01:14:33 PM

Did you RAM CLEAR and try again? Looks like something with NVRAM.


If you did maybe your batteries on the backplane are dead? Replace them.

Title: Re: WMS BB1 Setup System halted error
Post by: rickhunter on April 23, 2017, 02:46:46 PM

There are no batteries on backplane of bb1's (you are getting confused with alpha). But I suspect the battery on the mpu is probably bad and didn't survive the reboot after the clear.

Title: Re: WMS BB1 Setup System halted error
Post by: coolwavepic on April 23, 2017, 02:48:36 PM

YES! Sorry I was thinking the MPU. lol Thanks for clarifying for me Rick.  :applause:

Title: Re: WMS BB1 Setup System halted error
Post by: BrianM on April 23, 2017, 06:17:38 PM

Thank you Yoeddy and coolwavepic.   Up and running.  Replaced the 3 batteries, pulled the top box card and then cleared it three times to be safe.   
Thanks again for the help

Title: Re: WMS BB1 Setup System halted error
Post by: coolwavepic on April 23, 2017, 06:33:37 PM

Awesome. Glad you're up and running.

Title: Re: WMS BB1 Setup System halted error
Post by: DP on May 24, 2020, 03:48:59 AM

Hello,
 I have been having troubles with my WMS BB1 Fire Island, like Drop Door Open & Stacker Switch Open. I have done everything I can ! So I just changed the 2 batteries on the board and powered it up and I’m getting System Halted Error. I have not reset anything, ( I don’t know how) Can you help
DP

Title: Re: WMS BB1 Setup System halted error
Post by: rickhunter on May 24, 2020, 11:46:16 AM

If you replaced the batteries, you need to perform a clear and setup the game again.  You will need a clear CF card to do so.  Clearing the games does not get rid of the door errors.  If as in your previous other postings, you have made sure the mpu is seated all the way in, and the error did not clear, then you most likely have a backplane issue since you already shorted the drop door switch.