New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: jagerstauf on May 12, 2017, 07:54:17 PM
-
Picking up my BB1 to BB2 conversion project again and started to tackle the 19" to 22" lower screen.
Currently have:
19" Kirstel LP
Model #: LCD18-009
Power and Touch merged into same connector
Upgrading to:
22" Ceronix
Model #: 2209-LCD
Power and Touch are two different connectors
Looking through the various 19" to 22" upgrade threads there has been a mention to a need for a new cable for the power and touch on the lower unit (my upper is AC now). Some have used one from a different setup, purchased one, or made it themselves. I had a few questions in regards to this.
1) Does anyone have one of these available/for sale?
2) Those who did make one do you have the schematics for the pin outs if I were to attempt to create one?
3) Assume it would continue to plug into the same spot on the back panel (tagged as Touch Screen)?
Attached are some pictures of the Kristel connector I'm moving from and the Cernoix I'm upgrading to.
-
A part number or proper name would be appreciated so I can attempt to find it from a vendor. I've done some looking but haven't been able to locate the correct one.
-
There are no OEM part numbers for what you need, since these type of conversions were never done by WMS. You basically have to make your own or have someone make one for you.
-
Understood, thanks for the information.