**Reel Slots** Gaming Machines > Bally Electromechanical |
Belly Glass |
<< < (2/14) > >> |
tomstark22:
I think I deciphered your post CV. With that said has anyone tried touching these up? |
Amechanic:
--- Quote from: tomstark22 on November 08, 2014, 11:25:06 PM ---I think I deciphered your post CV. With that said has anyone tried touching these up? --- End quote --- I think your best bet is to look into a company that could do a reproduction. I would start with a company that does pinball back glass. You could try Franks Casino Glass is Las Vegas.. That phone number is 702-207-2440.. Email is CASINOGLASS@AOL.COM. If he has it expect to pay top dollar for vintage glass. Gary |
RiseLikeRa:
Tom As promised I have put out feelers for you. I think that Roz is right about the price IF you should find the exact match. Gary just reminded me in his post that there was a guy on THIS forum who made custom glass. I don't remember his handle and I haven't seen any posts by him since everything got switched over from .net to .com. We lost a lot of good folks then. If my old brain can recalls correctly his works looked pretty good and most came in at about $125. I think a digital photo would get him started. If you have time give a look at the archives. I am sure that you will find him there somewhere. Happy hunting Ra |
tomstark22:
I appreciate all the help. I will call and research around with what you all have given me. Cross my fingers! |
CVslots:
It is possible to do it yourself, but I can see why someone would charge $125. For a full repro, I don't know if that's enough actually (based on my own experience doing it). Do you have any additional pics of the belly glass you're wanting? We are finishing up a reproduction belly glass for an old Spa Amusements slot machine my husband Darrell just couldn't live without. Well, the machine arrived from AZ with broken glass. We took a picture of the broken glass, photoshopped it to remove any signs of the cracks (took hours, but may have been due to a poor program choice), then had it printed on clear water-decal adhesive laser paper. We will now apply that to an 1/8" piece of glass, over which another piece of 1/8" glass will go. |
Navigation |
Message Index |
Next page |
Previous page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |