Monitor Repair Log and Database. **Arcade and Gaming** > LCD and CRT Monitor Repair Tech Support

Lacking red on monitor, 17 inch Game King 3902.

(1/2) > >>

Bmwsyc:
New to me machine, also new to Game Kings. Initially not working, found shorted wires between the isolation transformer and the monitor chassis, and a blown fuse in the isolation transformer. Everything is working now, but the screen is lacking or doesn’t have any red at all. Are there adjustment pots for color? I checked the connections from the monitor board to the 19 pin connector and took a brass brush to the pins.

Is there a trick I don’t know of, I couldn’t find any pots for color. Is it time for a new monitor or re caping?

Thanks!

Tilt:
It would be helpful to know the make and model number of your monitor.  Many monitors have RGB driver and cutoff adjustment pots on the yoke board on the rear of the crt.  See if yours does.

shortrackskater:
Moved to CRT and LCD repair
~moderator

Bmwsyc:
Ceronix 1793, I looked again, I didn’t see anything obvious.

Tilt:
You're a contributing member so you have access to the downloads.  There's some 1793 documentation that you can download that may be helpful.

https://newlifegames.com/nlg/index.php?action=downloads;cat=18

Navigation

[0] Message Index

[#] Next page