New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: puckhead on February 12, 2021, 07:59:47 PM

Title: odd error codes while trying to enable bill acceptor
Post by: puckhead on February 12, 2021, 07:59:47 PM

s plus with a 16 mhz board. had a code 12, and a dead battery.  replaced battery, ram clear, go thru the steps, no hitches, works well. move on to BV chip. install chip, turn on and get a 3100 code( hopper was out). replace game chip, get a 61. push white button, get a 61-1, turn reset key and game works well.  reinstall bv  chip.    now get a code 21. put back game chip, code 61, do the reset , works great.  try bv chip again( different chip, just in case) . this time get a code 67. reinstall game chio, code  61 again, reset as above, all works well.  at this point i stop, game works flawlessly with coins.

any ideas?

thanks

Title: Re: odd error codes while trying to enable bill acceptor
Post by: sixcardmark on February 12, 2021, 08:14:17 PM

Whenever you get a 67 turn machine off and back on again.  You should never get a 67 after installing a bv set chip.

Title: Re: odd error codes while trying to enable bill acceptor
Post by: puckhead on February 12, 2021, 10:46:02 PM

shouldnt get a 21 or 3100 either, but i did. no idea why

Title: Re: odd error codes while trying to enable bill acceptor
Post by: Phan000 on April 16, 2021, 06:48:19 AM

Having the same issue with my BV.  Won’t enable, but works great otherwise.  Getting code 21 as well.


Love to hear a suggestion on this.

Title: Re: odd error codes while trying to enable bill acceptor
Post by: Badbaud on April 16, 2021, 08:00:15 AM

Wondering of both of you got the set denomination chip from the same vendor and the chip they sent you was defective.

Title: Re: odd error codes while trying to enable bill acceptor
Post by: Phan000 on April 17, 2021, 01:01:04 PM

I had to use clear chip, and reinsert BV chip a few times.  Eventually it worked.


Brand new bv chip from popular eBay vendor.

Title: Re: odd error codes while trying to enable bill acceptor
Post by: puckhead on April 17, 2021, 01:36:35 PM

a set 90 and set 15 chip got it going. keep in mind, it was a 16mhz board, not the common 10 mhz