Coin Comparitors and Other Coin acceptors > Coin Comparitors and Other Coin acceptors
IGT Double diamond S Plus, coin comparison issue!
Stayouttadabunker:
Look at the photo I've attached below.
I highlighted with yellow boxes, a resistor soldered onto the coin sensitivity potentiometer dial.
Someone definitely tried to mod that circuit board.
I'd look for a new coin comparitor by placing a WTB ad in the Classifieds section of NLG, or contacting an NLG vendor/member.
Click on photo below to enlarge if needed...>>>
hotlsot:
That's a large coin CC-16. It won't work very well with quarters. Good chance you have large coin optic spacer in the machine so it won't see quarters very well, if at all.
jay:
So that would be a cc-33 not a cc-16
If you want to use quarters you will also need to look at the hopper too.
It would have a large wheel for dollar ls vs one designed for quarters.
David Walz:
--- Quote from: jay on April 22, 2024, 02:21:47 PM ---So that would be a cc-33 not a cc-16
If you want to use quarters you will also need to look at the hopper too.
It would have a large wheel for dollar ls vs one designed for quarters.
--- End quote ---
No hopper I need to pick one up later on.
David Walz:
:thank_you: everyone, I will toss this one. I am rebuilding the slot machine. :thank_you:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |